Boilers and Equipment
Supply, installation and commissioning of Scotch-type and water-tube steam boilers, thermal oil and hot water boilers with their auxiliary equipment.
Products in this group
Three-pass steam boiler
Scotch-type fire-tube boiler for industry: up to 30 000 kg/h of steam at pressures up to 25 bar
- ≤ 30 000 kg/h
- ≤ 21 000 kW
- ≤ 25 bar
Water-tube steam boiler
Low-water-content boiler that raises steam in 10–15 minutes: up to 80 000 kg/h of steam at up to 160 bar
- ≤ 80 000 kg/h
- ≤ 160 bar
- Efficiency ≥ 95 %
Mobile steam boiler room
Complete steam boiler house in a 20 ft or 40 ft ISO container, factory-tested and ready to connect
- ≤ 6000 kg/h
- ≤ 16 bar
- ISO 20 ft / 40 ft
Liquid and gas-fired thermal oil heater
Forced-circulation coil heater that brings thermal oil up to 420 °C in a closed loop (special equipment above 300 °C)
- ≤ 420 °C (special equipment > 300 °C)
- ≤ 12 000 kW
- ≤ 25 bar
SWB superheated water boiler
Three-pass pressurised hot water boiler that keeps water liquid above its boiling point in a closed circuit
- ≤ 10 000 000 kcal/h
- ≤ 12 bar
- Efficiency 93–94 %
Smoke-tube steam generator
Low-water-content generator on one skid with burner, water treatment and panel, raising steam in 5–10 minutes
- ≤ 2500 kg/h
- ≤ 16 bar
- ≤ 20 000 kg/h (in cascade)
Coil-type steam generator
Compact generator that makes steam on demand without storing it: steam in 2–3 minutes, pressures up to 100 bar
- ≤ 5000 kg/h
- ≤ 100 bar
- Efficiency 92–94 %
ISG indirect steam generator
Generator that raises clean, hygienic steam from thermal oil, hot water or steam heat, with no burner or flue
- ≤ 30 000 kg/h
- ≤ 60 bar
- No burner or flue needed
WHRB waste heat steam boiler
Fire-tube boiler that turns process exhaust heat into up to 20 000 kg/h of steam, with zero emissions on site
- ≤ 20 000 kg/h
- ≤ 25 bar
- Zero emissions on site
SB-E electric steam boiler
Fully automatic, skid-mounted electric steam boiler that needs no burner, flue or fuel supply
- ≤ 5000 kg/h
- ≤ 3500 kW
- ≤ 100 bar
Electric thermal fluid heater
Skid-mounted heater that brings thermal oil up to 350 °C with electricity, without burner or flue
- ≤ 350 °C
- ≤ 3500 kW
- ≤ 10 bar
HAB-E electric hot air generator
Non-pressurised hot air generator that heats air electrically up to 700 °C, with no burner or flue
- ≤ 40 MW
- ≤ 700 °C (1300 °F)
- No burner or flue needed
HWB-E electric hot water boiler
Skid-mounted boiler that heats water electrically without turning it into steam, for pressures of up to 16 bar
- ≤ 3500 kW
- ≤ 16 bar
- No burner or flue needed
WB-E electric water bath heater
Heater that warms natural gas, crude oil and process fluids indirectly through an electrically heated water bath
- ≤ 8 000 000 kcal/h
- Water bath ≤ 87 °C
- API 12K · ASME VIII-1
HGP direct-fired air heater
Non-pressurised heater that mixes flame gases with clean air and sends hot gas of up to 1200 °C straight to the process
- ≤ 21 000 kW
- ≤ 1200 °C
- Turndown 20:1
HAB indirect-fired air heater
Non-pressurised heater delivering clean air of up to 380 °C that never touches the combustion products
- ≤ 7000 kW
- ≤ 380 °C
- Turndown 20:1
TD thermal degasser
CE-marked degasser designed to EN 13445 that strips O₂ and CO₂ from boiler feedwater by heating it with steam
- 1 … 50 t/h
- 102 °C (pressurised type)
- Ex zone 1 (optional)
Steam accumulator
Insulated pressure tank that covers sudden steam peaks as stored superheated water flashes into steam
- EN 13445 · 2014/68/EU
- Ex zone 1 (optional)
- Modbus TCP/IP · Profinet
Fast hot water storage cylinder
Straight-tube counterflow heater producing large flows of hot water from steam, hot or superheated water, or thermal oil
- ≤ 64 t/h
- ≤ 100 bar (1450 psig)
- EN 13445 · AD 2000
All product groups
Let's choose the right product for your project together
Tell us about your plant and what you need, and our engineers will recommend the right solution.