Rotermi
Combustion and heat equipment designed and built for each project
Rotermi Enerji is an Istanbul-based company with 15 years of experience in industrial combustion systems, providing engineering, manufacturing, installation and commissioning.
Rotermi-branded burners, heat exchangers, tanks, fuel conversion systems and control panels are designed and built for each project and commissioned on site.
Why Rotermi
- Design and manufacturing for each project
- Conversion to natural gas, LPG, LNG, diesel, fuel oil and biogas
- One point of contact from engineering to commissioning
- Local service and spare parts in Uzbekistan

Rotermi products
Monoblock Burners
Monoblock burners for gas, liquid and dual fuel with single-stage, two-stage or modulating control.
See details
Industrial Burners
Duoblock industrial burners for gas, liquid, solid and combined fuels, with equipment designed per process.
See details
Process Burners
Duoblock process burners for thermal oil boilers, industrial furnaces, dryers and hot air generators.
See details
Flame Tube Combustion Systems
Start-up combustion systems with automatic pilot ignition for rotary kiln flame tubes.
See details
Duct Burners
Gas-fired burners that heat process air inside the duct, without a combustion chamber.
See details
Heat Exchangers
Liquid-to-liquid heat exchangers designed for the fluid, pressure and temperature.
See details
Recuperators
Recuperators transferring heat between gases, designed for the fluid, pressure and temperature.
See details
Economisers
Economisers providing heat transfer between liquid and gas streams, designed to the conditions.
See details
Vaporisers
Heat exchangers that turn a liquid into gas using hot water, steam or electricity.
See details
Evaporators
Units that evaporate a liquid using heat from the ambient air.
See details
Diesel Tanks
Main and day tanks for diesel storage, with optional level control.
See details
Fuel Oil Tanks
Main and day tanks for fuel oil with electric, coil or steam heating.
See details
LNG Tanks
Double-walled, insulated tanks for storing natural gas as a liquid at −162 °C.
See details
LPG Tanks
LPG tanks built to the relevant standards, with optional level systems and safety valve groups.
See details
Natural Gas Conversion
Converting liquid- or solid-fuel systems to natural gas: burner, gas train, automation and tests.
See details
Fuel Oil Conversion
Conversion to fuel oil with tank, pumping and heating station and viscosity control.
See details
Biogas Conversion
Using biogas from treatment plants, landfills or biomass in combustion systems.
See details
LNG Conversion
LNG conversion with tank, evaporator and pressure reduction for sites without pipeline gas.
See details
LPG Conversion
LPG conversion with tank, vaporiser and regulator station for areas without gas infrastructure.
See details
Diesel Conversion
Diesel conversion with tanks, pumps, filters and valve station, for standby or start-up fuel.
See details
Oxy-Fuel Combustion Conversion
Replacing combustion air with oxygen to cut stack losses and raise flame temperature.
See details
Preheated Air Combustion Conversion
Recuperative conversion using combustion air preheated with heat from the flue gas.
See details
O₂ / CO Trim System Conversion
Retrofitting O₂/CO trim control to an existing combustion system.
See details
DCS / PLC Control Systems
Project-specific DCS/PLC systems for burner and boiler control.
See details
Pneumatic Modulating Combustion Systems
Modulating combustion with the air–gas ratio set by an impulse from the air line.
See details
Mechanical Modulating Combustion Systems
Modulating combustion systems with air and gas set by a mechanical linkage.
See details
O₂ / CO Trim Systems
Measure O₂ and CO in the flue gas to tune combustion for maximum efficiency.
See details
Control and Power Panels
Project-specific control and power panels for burner and boiler control.
See details
Frequency Converters
Drives that save energy by changing frequency to match burner capacity.
See detailsLet's choose the right product for your project together
Tell us about your plant and what you need, and our engineers will recommend the right solution.